In stock
SKU: GW40K-SDT-C30 · Product code: SO3948
In stock (7 units) · 5 years official warranty, subject to applicable terms.
Not listed by SREDA
SREDA status: Not currently listed in the checked Net Metering inverter list. Confirm eligibility with SREDA and the relevant utility before project design.
The GoodWe GW40K-SDT-C30 is a 40 kW three-phase on-grid inverter in the SDT G3 series. It is aimed at commercial rooftops, factories, warehouses, schools, hospitals and industrial sites that already have a three-phase grid. It is not a hybrid inverter, and it does not keep a site powered during a grid outage.
It has 3 MPPT trackers and 2 strings on each. Input current is 42 A / 42 A / 32 A. Short-circuit current is 52.5 A / 52.5 A / 40 A. Separate trackers can help with arrays that face different directions, but they do not guarantee a higher yield. Strings must stay inside 1,100 V, 140–1,000 V and these current limits. From 1,000 V to 1,100 V the inverter goes to standby.
Maximum efficiency is 98.6% and European efficiency is 97.8%. Grid frequency is 50 Hz (45–55 Hz). Surge protection: Type III, with Type II optional. The series cover states a maximum of 21 A per string and up to 180% PV oversizing. This model column does not print a separate maximum PV kilowatt, so 180% is not a string-design approval by itself.
Weight is 28 kg, size is 585 × 483 × 230 mm, and noise is 45 dB. Ingress protection is IP66. Smart fan cooling needs the clearances in the installation manual. The AC connector is OT/DT terminal, maximum 35 mm². The DC connector is MC4, 4–6 mm². Night-time self-consumption is less than 1 W.
SOLAR24 states a 5-year official warranty. Terms, purchase records, installation and any registration still apply. The datasheet does not print a warranty term. AFCI, rapid shutdown, PID recovery and night-time power supply are optional and are not included on every unit.
GoodWe SDT G3 25–40kW datasheet, 17 April 2025, EN V2.1, GW40K-SDT-C30 column · Official PDF
The official warranty is subject to the exact model's applicable terms, purchase evidence, installation requirements and any applicable registration conditions. This is the five-year term stated by SOLAR24. A 10-year term or a free-replacement promise is not added here.
| Series | GoodWe SDT G3 |
|---|---|
| Model | GW40K-SDT-C30 |
| Product code | SO3948 |
| Type | Three-phase on-grid string inverter |
| Nominal output | 40 kW / 40 kVA |
| Max. AC active and apparent power | 40 kW / 40 kVA |
| Max. DC input voltage | 1,100 V; standby from 1,000–1,100 V |
| MPPT operating range | 140–1,000 V |
| Start-up / nominal input | 160 V / 600 V |
| MPPT trackers | 3 |
| Strings per MPPT | 2 |
| Max. input current per MPPT | 42 A / 42 A / 32 A |
| Max. short-circuit current per MPPT | 52.5 A / 52.5 A / 40 A |
| Nominal AC voltage | 220/380, 230/400 or 240/415 V; 3L/N/PE or 3L/PE |
| Output voltage range | 180–280 V, according to the local standard |
| Grid frequency | 50 Hz; 45–55 Hz |
| Max. output current | 60.7 A |
| Power factor | About 1, adjustable 0.8 leading to 0.8 lagging |
| Max. total harmonic distortion | Below 3% |
| Efficiency | Maximum 98.6%, European 97.8% |
| Surge protection | Type III, with Type II optional |
| Temperature / humidity | −30°C to +60°C / 0–100% |
| Max. operating altitude | 4,000 m |
| Cooling and noise | Smart fan cooling; 45 dB |
| User interface | LED; optional LCD; WLAN + app |
| Communication | RS485; Wi-Fi, LAN, Bluetooth or 4G optional |
| Weight and dimensions | 28 kg; 585 × 483 × 230 mm |
| Topology | Non-isolated |
| Night-time self-consumption | Less than 1 W |
| Ingress protection | IP66 |
| DC connector | MC4, 4–6 mm² |
| AC connector | OT/DT terminal, maximum 35 mm² |
| DC switch | Integrated |
| Source | GoodWe SDT G3 25–40kW datasheet, 17 April 2025, EN V2.1, GW40K-SDT-C30 column |
The selling price on this page is ৳260,000. The regular price is ৳300,000. The price is for the inverter. Panels, protection, mounting and installation are not included.
Rated active output is 40 kW and nominal apparent output is 40 kVA. On this datasheet the maximum AC active and apparent power are the same as those nominal ratings.
Yes. GW40K-SDT-C30 is a three-phase grid-tied string inverter in the GoodWe SDT G3 series. It is not a hybrid inverter and it is not an off-grid inverter.
GW40K-SDT-C30 has 3 MPPT trackers, with 2 strings per tracker. Do not use the tracker count from another SDT suffix.
Maximum input voltage is 1,100 V. When the input is between 1,000 V and 1,100 V the inverter enters standby, and it returns to normal operation when the voltage is back inside the MPPT working range.
The MPPT operating range is 140–1,000 V. Start-up voltage is 160 V and nominal input voltage is 600 V. The range at nominal power is in the user manual, not only on this datasheet.
The GW40K-SDT-C30 column lists 42 A / 42 A / 32 A maximum input current per MPPT, and 52.5 A / 52.5 A / 40 A maximum short-circuit current per MPPT. That is not the 40 A figure used by GW40K-SDT-P30 or GW50K-SDT-C30.
The datasheet lists 2 strings per MPPT. GW40K-SDT-C30 has 3 trackers, so the string plan has to match those trackers and the current limits above. Two strings on one tracker should be matched.
Maximum efficiency is 98.6% and European efficiency is 97.8%. These are datasheet conversion figures, not a promised annual yield.
Maximum output current is 60.7 A. Nominal output voltage can be 220/380 V, 230/400 V or 240/415 V, 3L/N/PE or 3L/PE. The output voltage range is 180–280 V according to the local standard.
The datasheet lists integrated PV string-current monitoring, insulation-resistance detection, residual-current monitoring, PV reverse-polarity protection, anti-islanding, AC overcurrent, AC short-circuit and AC overvoltage protection, plus an integrated DC switch.
DC and AC surge protection for GW40K-SDT-C30 are Type III, with Type II optional. The series cover's Type II line applies to other suffixes, including GW40K-SDT-P30, not this C30 column.
No matching row was returned for GW40K-SDT-C30 on the SREDA three-phase net metering search checked on 28 October 2026. SREDA status: Not currently listed in the checked Net Metering inverter list. Confirm eligibility with SREDA and the relevant utility before project design. A listing for GW50K-SDT-C30 does not approve this 40 kW model.
No. GW40K-SDT-C30 is an on-grid inverter. This datasheet does not list a battery port or a backup output. Anti-islanding shuts down AC output when the grid is down.
Weight is 28 kg. Dimensions are 585 × 483 × 230 mm. Ingress protection is IP66. Noise emission in this column is 45 dB. Cooling is smart fan cooling.
The user interface is LED, an optional LCD, and WLAN plus the app. Communication on the reviewed sheet includes RS485, with Wi-Fi, LAN, Bluetooth or 4G listed as optional rather than all included. Protocols for this column: Modbus TCP on the April 2025 sheet; the December 2025 sheet also lists Modbus RTU and Modbus TCP.
SOLAR24 states a 5-year official warranty for GW40K-SDT-C30. It remains subject to the official terms, purchase records, installation requirements and any registration conditions. The reviewed datasheet does not print a warranty term, and this page does not add a 10-year warranty.
Match a three-phase grid, 3 MPPT string design, the 42 A / 42 A / 32 A input limits, 1,100 V standby behaviour, 50 Hz grid frequency, and Type III, with Type II optional surge protection. Confirm SREDA and utility eligibility before relying on net metering. SOLAR24 currently lists 7 units in stock.
Customer reviews will appear here after real installations. No fabricated reviews are shown as live feedback.
Only customers who bought this product can write a review.
৳ 260,000
In stock (7 units)
In stock
-10%Pre-order
-13%In stock
In stock
In stock
-12%Pre-order
-17%In stock
In stock