GoodWe GW10K-SDT-30 10kW 3-Phase On-Grid Inverter

Q: Does the GoodWe GW10K-SDT-30 work during load-shedding?

No. It is a grid-tied on-grid inverter with no battery backup. During a grid outage it shuts down AC output for anti-islanding safety.

Q: Is this model on the SREDA net metering list?

GW10K-SDT-30 is listed on SREDA’s three-phase net metering search. Each site still needs its own approval from the local utility (REB, BPDB, DPDC, DESCO, NESCO or WZPDCL).

Q: How much solar can be connected?

The SDT G3 series allows up to 150% DC oversizing, so this 10kW inverter can take up to 15kW of PV. String design must stay inside 1,100V DC, the 140–1,000V MPPT window, and the stated short-circuit current. Above 1,000V the inverter goes to standby until voltage returns to the MPPT range.

Q: What warranty and service does SOLAR24 provide?

This page shows a 5-year official warranty. The datasheet itself does not print a warranty term. If SOLAR24 installs the system, service is free for the first 2 years, then paid service is available for up to 8 years. That period can be lengthened or shortened on request. Claim support with the order ID and serial number.

SKU: GW10K-SDT-30 · Product code: 1014

10 kW

৳ 115,000

Price: ৳ 115,000 | Stock: In Stock (18 Units)

SREDA Net Metering Listed

In stock · 5 years official warranty.

Model: GW10K-SDT-30
10 kW
Three phase

Product overview

Important system note: The GoodWe GW10K-SDT-30 is a three-phase grid-tied (on-grid) inverter. It does not support battery backup. During a national grid outage it shuts down AC output for anti-islanding safety.

The GoodWe GW10K-SDT-30 is a 10kW three-phase on-grid string inverter in the SDT G3 series, for residential and small commercial three-phase sites. Maximum efficiency is 98.5% (European efficiency 98.0%). DC input is up to 1,100V, the MPPT window is 140–1,000V DC, and the input current is 22A per MPPT. The series supports up to 150% DC oversizing and 110% AC overloading. The enclosure is IP66. This model is on SREDA’s three-phase net metering search. Each site still needs its own utility approval.

Rated power: 10kW, three-phase 230/400V
MPPT: 2 MPPT, 1 string each; 22A per MPPT
Efficiency: 98.5% / European 98.0%
Weight: 14.7 kg; 491 × 392 × 210 mm
Warranty: 5-year official warranty

GoodWe SDT G3 datasheet, 18 July 2025, EN V2.1

Technical specifications

Parameter	Datasheet value
Brand & Model	GoodWe GW10K-SDT-30 (SDT G3)
Inverter Category	Three-phase on-grid / grid-tied string inverter
Rated AC Output	10,000W (10kW)
Max. AC Output	11.0kW (110% overloading)
DC Oversizing	Series rating up to 150% (15kW)
Max. DC Input Voltage	1,100V DC
MPPT Voltage Range	140–1,000V DC
Start-up Voltage	160V DC
Nominal DC Voltage	600V DC
Max. Input Current per MPPT	22A per MPPT
Max. Short-Circuit Current per MPPT	27.5A per MPPT
MPPT Trackers / Strings	2 MPPT, 1 string each
Nominal AC Voltage	220/380, 230/400, 240/415V, 3L/N/PE or 3L/PE
Max. AC Output Current	16.7A
Nominal AC Frequency	50 / 60Hz
Power Factor	~1 (adjustable 0.8 leading to 0.8 lagging)
Total Harmonic Distortion	<3%
Maximum Efficiency	98.5%
European Efficiency	98.0%
Cooling & Noise	Natural convection (fanless on 4–15kW) (<30 dB)
Integrated Protection	Anti-islanding, residual current, reverse polarity, AC/DC overcurrent and overvoltage, DC switch
Surge & AFCI	DC/AC Type III (Type II optional). AFCI optional.
Communication	RS485, Wi-Fi, LAN and Bluetooth. 4G is optional.
Operating Temperature	-30°C to +60°C
Ingress Protection	IP66
Weight & Dimensions	14.7 kg \| 491 × 392 × 210 mm
Source	GoodWe SDT G3 datasheet, 18 July 2025, EN V2.1

Service from start to finish

SOLAR24 handles product selection, the government approval application, and installation. When SOLAR24 installs the system, service is free for the first 2 years. Paid service is then available for up to 8 years. That period can be lengthened or shortened on request.

Frequently asked questions

Does the GoodWe GW10K-SDT-30 work during load-shedding?

No. It is a grid-tied on-grid inverter with no battery backup. During a grid outage it shuts down AC output for anti-islanding safety.

Is this model on the SREDA net metering list?

GW10K-SDT-30 is listed on SREDA’s three-phase net metering search. Each site still needs its own approval from the local utility (REB, BPDB, DPDC, DESCO, NESCO or WZPDCL).

How much solar can be connected?

The SDT G3 series allows up to 150% DC oversizing, so this 10kW inverter can take up to 15kW of PV. String design must stay inside 1,100V DC, the 140–1,000V MPPT window, and the stated short-circuit current. Above 1,000V the inverter goes to standby until voltage returns to the MPPT range.

What warranty and service does SOLAR24 provide?

This page shows a 5-year official warranty. The datasheet itself does not print a warranty term. If SOLAR24 installs the system, service is free for the first 2 years, then paid service is available for up to 8 years. That period can be lengthened or shortened on request. Claim support with the order ID and serial number.

Build a three-phase on-grid system

Pair the GW10K-SDT-30 with solar panels and estimate the bill cut in the solar calculator. For installation and the net metering application, see services. Other models in this series: GW5000-SDT-30, GW20K-SDT-30, GW25K-SDT-C30, GW30K-SDT-C30.

Reviews

Customer reviews will appear here after real installations. No fabricated reviews are shown as live feedback.

Only customers who bought this product can write a review.

৳ 115,000

In stock

Compatible products

-19%In stock

Solis S5-GR3P10K 10 kW Three-Phase On-Grid InverterSolis

10 kW three-phase grid-tied inverter for a 230/400 V supply
Takes up to 15 kW of solar panels (150% DC/AC ratio)
Two MPPT inputs, 32 A each, with up to four strings in total
IP66 enclosure, rated for -25 to +60 °C
Monitoring over RS485, with optional Wi-Fi or GPRS module and SolisCloud app

৳ 117,000৳ 145,000