-29%In stock- 605W rated output
- N-type bifacial dual-glass module
- 22.40% module efficiency
- 1500V DC maximum system voltage
- 12-year product / 30-year performance warranty, subject to terms

Jinko
SKU: JKM600N-66HL4M-BDV · Product code: SO1736
In stock (84 units) · 12-year product warranty and 30-year performance warranty, subject to terms
SREDA status: Not currently located in the checked Net Metering solar-module list. Confirm model eligibility with SREDA before relying on net-metering approval.
The JKM600N-66HL4M-BDV is the 600 W bin of this family. It is the lowest bin in this six-model family. The frame and glass are shared; the STC electrical values are not.
The F1 sheet describes N-type cells, HOT 2.0 and SMBB technology, in a bifacial dual-glass build. STC output is 600 W at 22.21%, with Vmp 40.16 V and Imp 14.94 A. NOCT power is 453 W. That is a different test, not a field guarantee.
The 80 ± 5% reference bifacial factor is not a guaranteed extra-energy percentage. Rear-side gain depends on height, albedo, shade and layout. 1500 V DC is the system limit, not this panel's working voltage. The 35 A figure is the maximum series fuse rating, not the operating current.
For this 600 W bin, NOCT Voc is 45.86 V and NOCT Isc is 12.79 A. Cold-weather string voltage starts from the STC Voc of 48.28 V, then has to stay inside the inverter limits, the cable design and local rules. This page does not give one string length for every site.
The Pmax temperature coefficient is −0.29%/°C, so a hot cell produces less than the 600 W nameplate. Shade, dust and rear ventilation change site output. Module wattage does not by itself set daily energy.
The module is 2382 × 1134 × 30 mm and weighs 32.4 kg, with an anodized aluminium frame. Mounting, extra cable and installation are not included in the 600 W panel price. Clean the glass without standing on the module or using abrasive tools.
Product warranty is 12 years. The performance warranty is 30 years of linear power coverage, not 30 years of full panel replacement. The F1 cover graphic prints 0.40% annual degradation and 87.4% at year 30. The supplied poster prints 12/25 years; this page follows the F1 datasheet.
100% original and official products from us, backed by a guarantee.
Product warranty: 12 years
Performance warranty: 30 years
The F1 cover also prints IEC 61215:2016 and IEC 61730:2016, plus ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 management-system lines. Those ISO lines are not a separate certificate of every module. Warranty coverage is subject to JinkoSolar's applicable official warranty terms, product version, region, installation requirements, and warranty claim conditions.
| Model | JKM600N-66HL4M-BDV |
|---|---|
| Product code | SO1736 |
| STC Pmax | 600 W |
| STC efficiency | 22.21% |
| STC Vmp / Imp | 40.16 V / 14.94 A |
| STC Voc / Isc | 48.28 V / 15.84 A |
| NOCT Pmax | 453 W |
| NOCT Vmp / Imp | 37.60 V / 12.05 A |
| NOCT Voc / Isc | 45.86 V / 12.79 A |
| Cells | N-type monocrystalline, 132 (2 × 66) |
| Glass | Front 2.0 mm AR glass, back 2.0 mm heat-strengthened glass |
| Size / weight | 2382 × 1134 × 30 mm / 32.4 kg |
| Max. system voltage | 1500 V DC (IEC) |
| Max. series fuse | 35 A |
| Power tolerance | 0 to +3% |
| Temperature coefficients | Pmax −0.29%/°C, Voc −0.25%/°C, Isc +0.045%/°C |
| Operating temperature | −40°C to +85°C |
| NOCT | 45 ± 2°C |
| Reference bifacial factor | 80 ± 5% |
| Frame | Anodized aluminium alloy |
| Junction box | IP68 |
| Cable | 4.0 mm², (+) 400 mm, (−) 200 mm |
| Packing | 36 per pallet, 72 per stack, 720 per 40-foot HQ |
| Mechanical load | Wind 2400 Pa, snow 5400 Pa |
| Standards on the F1 cover | IEC 61215:2016, IEC 61730:2016 |
| Linear power graphic | 0.40% annual, 87.4% at year 30 |
| Source | JinkoSolar JKM600-625N-66HL4M-BDV-F1-EN |
The selling price is ৳13,800 per panel. The regular price is ৳16,800. SOLAR24 lists 84 panels in stock. Mounting, cables and installation are not included.
Rated STC power is 600 W. It is the lowest bin in this six-model family. STC power is measured at 1000 W/m², 25°C cell temperature and AM 1.5.
STC module efficiency is 22.21%. That is the share of standard test irradiance converted by this exact bin, not a promised site yield.
This page is the 600 W bin, the lowest bin in this six-model family. The six modules share one mechanical design. Power, efficiency, Vmp, Imp, Voc and Isc change by bin. Do not copy the 625 W electrical row onto this panel.
STC for this panel is 600 W. NOCT, at 800 W/m², 20°C ambient, AM 1.5 and 1 m/s wind, is 453 W. NOCT is another test condition, not guaranteed field output.
At STC, Vmp is 40.16 V, Imp is 14.94 A, Voc is 48.28 V and Isc is 15.84 A. Vmp and Imp are the maximum-power point. Voc is open-circuit voltage. Isc is short-circuit current.
Maximum system voltage is 1500 V DC (IEC). That is the array limit, not this panel's working voltage. This panel's STC Vmp is 40.16 V.
132 cells, arranged 2 × 66. The F1 sheet describes an N-type monocrystalline bifacial dual-glass module with HOT 2.0 and SMBB technology.
Both faces are glass: 2.0 mm anti-reflection glass in front and 2.0 mm heat-strengthened glass at the back. The rear can convert light that reaches it. How much extra energy that makes depends on height, albedo, shade and layout.
No. The F1 sheet lists a reference bifacial factor of 80 ± 5%. That is not a guaranteed percentage increase in total generation.
Dimensions are 2382 × 1134 × 30 mm. Weight is 32.4 kg. The frame is anodized aluminium. The junction box is IP68. This mechanical row is shared by the family; the electrical bin is still 600 W.
Operating temperature is −40°C to +85°C. NOCT is 45 ± 2°C. The Pmax temperature coefficient is −0.29%/°C, so hot cells produce less than the 600 W STC nameplate.
Maximum series fuse rating is 35 A. That is a protection rating, not this panel's operating current. STC Imp for this bin is 14.94 A.
The F1 cover prints a 12-year product warranty and a separate 30-year linear power warranty. The same graphic prints 0.40% annual degradation and a year-30 mark of 87.4%. That is retained power, not 30 years of full panel replacement. Coverage still follows JinkoSolar's applicable terms, version, region and installation conditions.
SREDA status: Not currently located in the checked Net Metering solar-module list. Confirm model eligibility with SREDA before relying on net-metering approval. A listed 605 W or 625 W cousin does not list this 600 W model.
Use this bin's STC Voc of 48.28 V for cold-weather string voltage, and Imp of 14.94 A for current. String length must stay inside the inverter's voltage, current and the 1500 V DC system limit. This page does not give a universal panel count.
No. ৳13,800 is the panel price. Mounting structures, extra cable and installation are separate.
Confirm the label reads JKM600N-66HL4M-BDV, 600 W, efficiency 22.21%, and Voc 48.28 V. Check the SREDA status for this exact model, then size the string to the chosen inverter. Keep the invoice for the 12-year product warranty and the 30-year performance warranty.
Customer reviews will appear here after real installations. No fabricated reviews are shown as live feedback.
Only customers who bought this product can write a review.
৳ 13,800
In stock (84 units)
-29%In stock
-29%In stock
-29%In stock
-29%In stock
-29%In stock
-29%In stock
-29%In stock
-29%In stock